01
Aluminium frame
The frame carries the load and provides mounting points for wall, atrium or facade installation.
투명 LED 디스플레이 시리즈
투명 LED 디스플레이 시리즈
Turn glass into media without blocking daylight.
크리스탈 필름 · 홀로그램 · 표준 투명
주광을 막지 않고 유리를 미디어 표면으로 바꿉니다. 쇼윈도 필름, 홀로그램 효과, 실내·실외 표준 커튼까지 세 가지 옵션을 공장 직공급과 구조·컨트롤 지원으로 제공합니다.
Up to 95%
Transparency on crystal film
1–3mm
Film thickness, no steel frame
P2.5–P20
Pitch range across the series
유리, 거리, 밝기로 선택
세 가지 모두 같은 컨트롤 플랫폼을 사용하며 한 프로젝트에서 조합할 수 있습니다.
크리스탈 필름 디스플레이
P4–P20 · 최대 95% 투명도
기존 유리에 바로 부착하는 3mm 자가 점착 필름.
자세히 보기
홀로그램 투명 디스플레이
P2.5–P6.25 · 80–90% 투명도
리테일과 전시에서 공중에 뜬 이미지를 위한 행잉 LED 메시.
자세히 보기
표준 투명 디스플레이
P2.6–P15.6 · 75–90% 투명도
창문, 아트리움, 파사드를 위한 알루미늄 프레임 패널.
자세히 보기Series performance
Pitch range and the job each sub-series is specified for.
| Series | Pitch | Specified for |
|---|---|---|
| 크리스탈 필름 디스플레이 | P4–P20 · 최대 95% 투명도 | 기존 유리에 바로 부착하는 3mm 자가 점착 필름. |
| 홀로그램 투명 디스플레이 | P2.5–P6.25 · 80–90% 투명도 | 리테일과 전시에서 공중에 뜬 이미지를 위한 행잉 LED 메시. |
| 표준 투명 디스플레이 | P2.6–P15.6 · 75–90% 투명도 | 창문, 아트리움, 파사드를 위한 알루미늄 프레임 패널. |
투명 LED 디스플레이 시리즈
Structure introduction
transparent LED display uses a framed transparent cabinet. An aluminium frame carries the LED modules, power supply and receiving card while leaving the centre of each cabinet open.
Series specification
02
Transparent module field
LED modules are arranged on a transparent substrate, keeping a percentage of the panel open to light.
03
Power and control chamber
Power supplies and receiving cards sit in a protected chamber within the frame, accessible for service.
04
Sealed outdoor option
Outdoor versions add sealing and a weather-rated rear cover for facade and atrium installations.
Design details
The decisions that affect how 투명 LED 디스플레이 시리즈 looks, installs and stays serviceable on site.
01
Transparency and brightness balance
The open area and LED package are selected for the background and viewing distance, so the screen does not read as a dark panel.
02
Cabinet depth
The frame depth is kept compact for window and atrium installations where clearance is limited.
03
Seam planning
Cabinet datums are set from the frame, keeping the module grid aligned across a large transparent wall.
04
Service access
Modules and electronics are reachable from the front or rear depending on the mounting condition.
Front maintenance
Service is planned before the wall is built. Modules, cards and power supplies are replaced from the access direction agreed on the drawing.
Front or rear module access
Service direction is agreed at design stage. Where rear access is impossible, front-service modules are specified.
Power and card replacement
Receiving cards and power supplies are field-replaceable units within the frame chamber.
Seal and cleaning checks
Outdoor installations include gasket inspection and a cleaning procedure that protects the transparent substrate.
Product credibility
Documented before it ships
투명 LED 디스플레이 시리즈 is built on the same production line as our project walls. Cabinets, modules and control settings are recorded per batch, and the documentation travels with the shipment so the site team is not working from memory.
ISO 9001
Factory process control
CE / RoHS / FCC
Product compliance
Batch tested
Aging and calibration record
2–3 years
Standard warranty
Quality record
- CE, RoHS and FCC documentation for the supplied configuration.
- Aging and white-balance calibration record per batch.
- Cabinet drawing, pixel map and control settings in the handover pack.
- Spare modules matched to the original production batch.
Transparent series selection
Choose the transparent route by the glass
Crystal film, holographic mesh and framed transparent cabinets solve different site conditions. Start with the glass or opening, then set transparency and brightness against the background.
01Film · mesh · framed cabinet
Existing glass or new opening
Crystal film bonds to existing glass and adds almost no depth. Holographic mesh is suspended for a floating layer. Standard transparent cabinets provide a framed structure for larger or outdoor openings.
0275–95% transparency
Balance transparency and brightness
A high-transparency film keeps daylight and sightlines but has less brightness headroom. A framed cabinet gives more output for facades and atriums where the background is bright.
03Remote control location
Find the controller and power route
The controller and power supply are located off the display surface. Confirm the cable path, access panel and whether the route can be hidden behind a mullion or ceiling.
Model comparison
Compare 투명 LED 디스플레이 시리즈 models
Pitch, power, cabinet and the job each model is specified for. Open a model to see its cabinet build, service access and quotation route.
| Model | Brightness | Avg power | Cabinet | Specified for | Detail |
|---|---|---|---|---|---|
Crystal Film P6.25 6.25mm | 4,500 nits | ≤180 W/m² | Film roll, cut to glass | Shop windows · Bank branches | View model |
Crystal Film P10 10mm | 4,000 nits | ≤150 W/m² | Film roll, cut to glass | Glass facades · Bank branches | View model |
Holographic P3.9 3.9mm | 1,500–8,000 nits | ≤260 W/m² | Hanging mesh, 500 × 500mm | Retail launches · Exhibitions | View model |
Holographic P6.25 6.25mm | 1,500–8,000 nits | ≤220 W/m² | Hanging mesh, 500 × 1000mm | Atrium suspensions · Window displays | View model |
Standard Transparent P3.91–7.8 3.91–7.8mm | 5,500 nits | ≤280 W/m² | 500 × 500 / 500 × 1000mm | Building facades · Atrium walls | View model |
Standard Transparent P5.2–10.42 5.2–10.42mm | 5,000 nits | ≤240 W/m² | 500 × 1000mm | Shop windows · Interior partitions | View model |
Standard Transparent P10.42 10.42mm | 5,000 nits | ≤200 W/m² | 500 × 1000mm | Glass facades · Atrium glazing | View model |
Typical values for the current series. Final brightness, power and cabinet detail are confirmed on the approved specification sheet.
Deployment playbook
Three transparent routes in context
The same glass can require a film, a suspended mesh or a framed curtain depending on depth, background and structural support.
01
Retail windows
The shopfront must stay open to the street. Crystal film preserves daylight and sightlines while adding a media layer to existing glass.
Crystal film · P6.25–P10 · 90–95% transparency
02
Atriums and showrooms
A suspended mesh creates a floating image without blocking the architecture behind. Rigging points and sightlines are planned together.
Holographic · P3.9–P6.25 · 80–90% transparency
03
Facades and transport hubs
A framed cabinet gives a stable structure across a large opening. Outdoor versions add sealing and a weather-rated rear cover.
Standard transparent · P2.6–P15.6 · IP65 option
Delivery control
Transparent project sequence
Transparent displays are sensitive to the glass survey, mounting method and background. The project starts with a site check rather than a cabinet list.
Handover pack
- Approved cabinet layout and pixel map
- Control settings and calibration record
- Packing list, spare list and service notes
- 1
Freeze the drawing
Approved layout, pixel map and power scheduleCabinet layout, control points, power distribution and the service direction are fixed before materials are cut. The approved drawing becomes the reference for every later check.
- 2
Match the batch
Batch record and module position listLED modules, driver ICs and power supplies are drawn from the same production batch where the order size allows, then labelled by cabinet position.
- 3
Age and calibrate
Aging log and calibration fileAssembled cabinets run through an aging cycle and white-balance calibration. Faults found at this stage are corrected before packing, not after arrival.
- 4
Pack for the route
Packing list, spare list and handover packCabinets are packed against the transport method and site access. The handover pack includes the glass survey notes, controller location and cleaning procedure for the transparent surface.
Buyer questions
Questions we answer before quotation
These are the points that most often change the specification after the first enquiry. If your question is not here, send it with the site details.
Ask an engineer01Can all three transparent routes share one control system?
They can share a compatible control platform when the receiving cards and playback system are specified together. This is useful where a project combines a film window with a framed atrium wall.
02Does transparency reduce brightness?
Yes. A more open pixel grid lets more background through but leaves less area for light output. The specification balances transparency, brightness and viewing distance for the actual site.
03Which route works on existing glass?
Crystal film is designed for existing glass. Holographic mesh and framed cabinets need a frame or suspension structure, so they are used where the opening or ceiling can support the installation.
04Can transparent displays be used outdoors?
Standard transparent cabinets have an IP65 outdoor option. Film and holographic routes are usually indoor or semi-outdoor; the exposure and cleaning plan are confirmed during the survey.
Next step
Plan a transparent installation
Use the retail guide, installed references and transparent white paper to compare film, mesh and framed cabinets.
Retail and commercial guide
See how this series is specified against viewing distance, room light and installation constraints.
Open application guideInstalled references
Review project types, cabinet formats and the delivery scope used on comparable installations.
View case studiesDatasheets and drawings
Request the current specification sheet, cabinet drawing and control compatibility list.
Open downloadsTalk to an engineer
Send the wall size, viewing distance and site photos. We reply with a configuration and quotation.
Request a quoteControl-system compatibility confirmed with the quotationCE / RoHS / FCC documentation for the supplied configuration