01
Aluminium frame
The frame carries the load and provides mounting points for wall, atrium or facade installation.
투명 LED 디스플레이 시리즈
표준 투명 LED 디스플레이
Permanent transparency for facades and atriums.
P2.6–P15.6 · 75–90% 투명도 · 알루미늄 캐비닛
실내외 고정 설치용 프레임 투명 패널. 알루미늄 캐비닛이 모듈과 전원을 지지해 창문, 아트리움, 파사드에 안정적인 구조를 제공합니다.
Up to 95%
Transparency on crystal film
1–3mm
Film thickness, no steel frame
P2.5–P20
Pitch range across the series
- 75–90% 투명도
- 실내 및 IP65 실외
- 500×500 / 500×1000mm 캐비닛
- 전면 또는 후면 서비스
장점
견고한 프레임
알루미늄 캐비닛이 넓은 유리에서 정렬을 유지합니다.
실내와 실외
밀폐 실외 캐비닛이 비와 먼지를 견딥니다.
시선 유지
투명 커튼이 낮에도 실내를 보이게 합니다.
표준 컨트롤
주요 동기 및 클라우드 시스템과 연동.
Standard transparent in context
Colour, clarity and cabinet build
The standard cabinet keeps the view through the glass while carrying a bright image. These views show the LED face, the transparency behind it and the framed rear structure that carries power and signal.
Standard Transparent P3.91–7.8
Structure introduction
Standard Transparent P3.91–7.8 uses a framed transparent cabinet. An aluminium frame carries the LED modules, power supply and receiving card while leaving the centre of each cabinet open.
500 × 500 / 500 × 1000mm
02
Transparent module field
LED modules are arranged on a transparent substrate, keeping a percentage of the panel open to light.
03
Power and control chamber
Power supplies and receiving cards sit in a protected chamber within the frame, accessible for service.
04
Sealed outdoor option
Outdoor versions add sealing and a weather-rated rear cover for facade and atrium installations.
Design details
The decisions that affect how Standard Transparent P3.91–7.8 looks, installs and stays serviceable on site.
01
Transparency and brightness balance
The open area and LED package are selected for the background and viewing distance, so the screen does not read as a dark panel.
02
Cabinet depth
The frame depth is kept compact for window and atrium installations where clearance is limited.
03
Seam planning
Cabinet datums are set from the frame, keeping the module grid aligned across a large transparent wall.
04
Service access
Modules and electronics are reachable from the front or rear depending on the mounting condition.
Front maintenance
Service is planned before the wall is built. Modules, cards and power supplies are replaced from the access direction agreed on the drawing.
Front or rear module access
Service direction is agreed at design stage. Where rear access is impossible, front-service modules are specified.
Power and card replacement
Receiving cards and power supplies are field-replaceable units within the frame chamber.
Seal and cleaning checks
Outdoor installations include gasket inspection and a cleaning procedure that protects the transparent substrate.
Product credibility
Documented before it ships
Standard Transparent P3.91–7.8 is built on the same production line as our project walls. Cabinets, modules and control settings are recorded per batch, and the documentation travels with the shipment so the site team is not working from memory.
ISO 9001
Factory process control
CE / RoHS / FCC
Product compliance
Batch tested
Aging and calibration record
2–3 years
Standard warranty
Quality record
- CE, RoHS and FCC documentation for the supplied configuration.
- Aging and white-balance calibration record per batch.
- Cabinet drawing, pixel map and control settings in the handover pack.
- Spare modules matched to the original production batch.
적용 분야
쇼핑몰
아트리움 유리와 난간을 콘텐츠 면으로.
건물 파사드
상업 건물의 대형 투명 커튼.
교통 허브
빛을 막지 않고 정보를 전하는 창.
은행과 사무실
화면이 되는 프라이버시 유리.
Model range
Each model links to its cabinet, specification and installation notes.
Standard Transparent P3.91–7.8
3.91–7.8mmFramed transparent cabinet for permanent glass installations that need higher brightness than film.
Standard Transparent P5.2–10.42
5.2–10.42mmBalanced transparent cabinet for retail glazing and interior partitions at a four-metre viewing distance.
Standard Transparent P10.42
10.42mmLarge-format transparent cabinet for facades and tall atrium glazing viewed from eight metres.
Standard transparent selection
Use a framed cabinet when the opening needs structure
Standard transparent cabinets are selected when the installation needs a stable frame, a larger opening or an outdoor rating. The cabinet layout and service direction are fixed early.
01IP65 outdoor option
Indoor or outdoor exposure
Indoor cabinets are used for atriums, windows and transport hubs. Outdoor versions add sealing, a weather-rated rear cover and a fixing detail for the facade.
02500 × 500 / 500 × 1000 mm
Set the opening grid
The 500 × 500 and 500 × 1000 mm cabinets are laid out to the finished opening. Edge trim and structural fixing are planned with the cabinet grid, not after it.
03Front or rear service
Choose the service side
Front service is used where the wall faces a road or atrium with no rear access. Rear service is used where a walkway or plant room is available.
Model comparison
Compare 표준 투명 디스플레이 models
Pitch, power, cabinet and the job each model is specified for. Open a model to see its cabinet build, service access and quotation route.
| Model | Brightness | Avg power | Cabinet | Specified for | Detail |
|---|---|---|---|---|---|
Standard Transparent P3.91–7.8 3.91–7.8mm | 5,500 nits | ≤280 W/m² | 500 × 500 / 500 × 1000mm | Building facades · Atrium walls | View model |
Standard Transparent P5.2–10.42 5.2–10.42mm | 5,000 nits | ≤240 W/m² | 500 × 1000mm | Shop windows · Interior partitions | View model |
Standard Transparent P10.42 10.42mm | 5,000 nits | ≤200 W/m² | 500 × 1000mm | Glass facades · Atrium glazing | View model |
Typical values for the current series. Final brightness, power and cabinet detail are confirmed on the approved specification sheet.
Deployment playbook
Framed transparency in architecture
The standard cabinet is the route for larger openings where the display needs a structure and a predictable service plan.
01
Shopping mall atriums
The wall spans a large opening and is seen from multiple levels. The frame holds alignment and the transparent field keeps the architecture visible.
P3.91–7.8 · 75–90% transparency
02
Building facades
Outdoor cabinets carry the display across a facade. Wind load, fixing and service access are reviewed with the building structure.
P7.8–15.6 · IP65 · wind-load frame
03
Transport hubs
Information and advertising run through glass walls without blocking daylight. The cabinet layout follows the structural mullions.
P3.91–7.8 · high-brightness option
Delivery control
Framed transparent delivery
The cabinet grid, edge trim and fixing schedule are issued together. Outdoor orders add the seal and drainage check before packing.
Handover pack
- Approved cabinet layout and pixel map
- Control settings and calibration record
- Packing list, spare list and service notes
- 1
Freeze the drawing
Approved layout, pixel map and power scheduleCabinet layout, control points, power distribution and the service direction are fixed before materials are cut. The approved drawing becomes the reference for every later check.
- 2
Match the batch
Batch record and module position listLED modules, driver ICs and power supplies are drawn from the same production batch where the order size allows, then labelled by cabinet position.
- 3
Age and calibrate
Aging log and calibration fileAssembled cabinets run through an aging cycle and white-balance calibration. Faults found at this stage are corrected before packing, not after arrival.
- 4
Pack for the route
Packing list, spare list and handover packCabinets are packed against the transport method and site access. Outdoor cabinets are packed with the seal kit, fixing schedule and service procedure for the facade.
Buyer questions
Questions we answer before quotation
These are the points that most often change the specification after the first enquiry. If your question is not here, send it with the site details.
Ask an engineer01Can standard transparent cabinets be used outdoors?
Yes, the outdoor version adds IP65 sealing and a weather-rated rear cover. The fixing detail and wind load are reviewed with the building structure.
02How much transparency is lost with a frame?
The framed cabinet typically provides 75–90% transparency depending on pitch and model. The frame carries the modules and power, so the open area is balanced against structural needs.
03Can the wall follow a mullion grid?
Yes. The cabinet layout is set out around the structural mullions and finished opening, with edge trim detailed to close the remaining gaps.
04What service access is required?
Front service is available where there is no rear walkway. The service direction and access panel positions are confirmed on the approved drawing.
Next step
Prepare the facade brief
Use the outdoor media guide, case references and transparent white paper to confirm cabinet layout and sealing.
Outdoor media guide
See how this series is specified against viewing distance, room light and installation constraints.
Open application guideInstalled references
Review project types, cabinet formats and the delivery scope used on comparable installations.
View case studiesDatasheets and drawings
Request the current specification sheet, cabinet drawing and control compatibility list.
Open downloadsTalk to an engineer
Send the wall size, viewing distance and site photos. We reply with a configuration and quotation.
Request a quoteControl-system compatibility confirmed with the quotationCE / RoHS / FCC documentation for the supplied configuration
투명 커튼 주문
개구부 크기와 설치 구조를 알려주세요. 캐비닛 배치와 풍하중을 확인합니다.